RS Resurrection – Finale, For Now
Yesterday I got mad enough to really figure out why the rear brakes were not working. I ended up taking off the master cylinder to adjust the linkage (it’...
Tag: RS-Resurrection
RS Resurrection – Muffler Repack
It struck me the other day that I have had this Luftmeister two into one exhaust on the bike for more than 15 years and have never repacked the muffler.
I Think Someone’s Getting Jealous…
I got on the K1100RS to ride home from work this afternoon and headed down the road to get on the freeway. As I accelerated down the entrance ramp all of a sudd...
RS Resurrection – Went For A Ride!
The seat hinges arrived today so I could attach the seat to the motorcycle. So in celebration I went for a short ride! I actually went for two rides. I started ...
RS Resurrection – Work, Work, Work
More details on recent work. Since the last update I’ve done the following: Replaced the neutral switch (which you can do without pulling the transmission...
RS Resurrection – It’s Alive!
Just a short post – I’ll do a more detailed one later. I got the RS to the point where I could start her tonight, so I put some gas in the tank and ...
RS Resurrection – We Have A Cockpit!
Spent some more time on the RS this afternoon. I installed the brake and throttle assembly, the grips, the gauge cluster and the brake line from the master cyli...
RS Resurrection – Good News, Bad News
Good news and bad news today. Good news: I picked up the stainless braided brake lines, battery and brake pads after work. I managed to get all the brake lines ...
RS Resurrection – Getting Closer
I did some more work on the RS over the last few days. It’s starting to look like real progress is happening. Over the last couple of days I have: Run the...
RS Resurrection – Forward Progress
Lots of progress over this long weekend. Rebuilt the rear brake caliper and master cylinder. Cleaned up the transmission and bolted it to the engine. Replaced t...